The alerts are generated based on status codes that are specific to job failures.Alerts are generated for the listed status codes only for the following Job Types: Backup, Snapshot, Snapshot Replication, Index from Snapshot, and Backup from SnapShot.
Status code | Error message |
---|---|
1 | The requested operation was partially successful |
2 | None of the requested files were backed up |
6 | The backup failed to back up the requested files |
9 | A necessary extension package is not installed or not configured properly |
10 | Allocation failed |
11 | System call failed |
12 | File open failed |
13 | File read failed |
14 | File write failed |
20 | Invalid command parameter |
21 | Socket open failed |
23 | Socket read failed |
24 | Socket write failed |
25 | Cannot connect on socket |
26 | Client/server handshaking failed |
27 | Child process killed by signal |
28 | Failed trying to fork a process |
29 | Failed trying to exec a command |
35 | Cannot make required directory |
36 | Failed trying to allocate memory |
37 | Operation requested by an invalid server |
39 | Client name mismatch |
40 | Network connection broken |
41 | Network connection timed out |
42 | Network read failed |
44 | Network write failed |
46 | Server not allowed access |
47 | Host is unreachable |
48 | Client hostname could not be found |
49 | Client did not start |
50 | Client process aborted |
52 | Timed out waiting for media manager to mount volume |
54 | Timed out connecting to client |
58 | Can't connect to client |
59 | Access to the client was not allowed |
61 | The vnetd proxy encountered an error |
63 | Process was killed by a signal |
67 | Client backup failed to read the file list |
69 | Invalid filelist specification |
71 | None of the files in the file list exist |
72 | The client type is incorrect in the configuration database |
74 | Client timed out waiting for bpstart_notify to complete |
83 | Media open error |
84 | Media write error |
85 | Media read error |
86 | Media position error |
87 | Media close error |
89 | Problems encountered during setup of shared memory |
90 | Media manager received no data for backup image |
93 | Media manager found wrong tape in drive |
96 | Unable to allocate new media for backup, storage unit has none available |
98 | Error requesting media (tpreq) |
103 | Error occurred during initialization, check configuration file |
112 | No files specified in the file list |
114 | Unimplemented error code |
129 | Disk storage unit is full |
130 | System error occurred |
142 | File does not exist |
154 | Storage unit characteristics mismatched to request |
155 | Disk is full |
156 | Snapshot error encountered |
158 | Failed accessing daemon lock file |
159 | Licensed use has been exceeded |
174 | Media manager - system error occurred |
190 | Found no images or media matching the selection criteria |
191 | No images were successfully processed |
196 | Client backup was not attempted because backup window closed |
198 | No active policies contain schedules of the requested type for this client |
200 | Scheduler found no backups due to run |
213 | No storage units available for use |
219 | The required storage unit is unavailable |
227 | No entity was found |
232 | A protocol error has occurred |
233 | Premature eof encountered |
636 | Read from input socket failed |
800 | Resource request failed |
806 | This mpx group is unjoinable |
811 | Failed to communicate with resource requester |
818 | Retention level mismatch |
1002 | Discovery detected a failed client |
1542 | An existing snapshot is no longer valid and cannot be mounted for subsequent operations |
2000 | Unable to allocate new media for backup, storage unit has none available. |
2001 | No drives are available for this job |
2002 | Invalid STU identifier type |
2003 | Drive is not allocated. |
2004 | Drive is already allocated |
2005 | MDS has received an invalid message from a media server. |
2006 | NDMP credentials are not defined in EMM. |
2007 | Storage unit is not compatible with requesting job |
2008 | All compatible drive paths are down |
2009 | All compatible drive paths are down but media is available |
2010 | Job type is invalid |
2011 | The media server reported a system error |
2012 | Media has conflicts in EMM |
2013 | Error record insert failed |
2014 | Media is not assigned |
2015 | Media is expired |
2016 | Media is assigned to another server |
2017 | Media needs to be unmounted from a drive |
2018 | Number of cleanings is invalid |
2019 | Media is in a drive that is not configured on local system |
2020 | Robotic library is down on server |
2021 | Allocation record insert failed |
2022 | Allocation status record insert failed |
2023 | Allocation identifier is not known to EMM |
2024 | Allocation request update failed |
2025 | Allocation request delete failed |
2026 | Allocation status request delete failed |
2027 | Media server is not active |
2028 | Media is reserved |
2029 | EMM database is inconsistent |
2030 | Insufficient disk space or high water mark would be exceeded |
2031 | Media is not defined in EMM |
2032 | Media is in use according to EMM |
2033 | Media has been misplaced |
2034 | Retry the allocation request later |
2035 | Request needs to pend |
2036 | Drive is in a robotic library that is up |
2037 | Drive is not ready |
2038 | Media loaded in drive is not write-enabled |
2039 | SCSI reservation conflict detected |
2040 | Maximum job count has been reached for the storage unit |
2041 | Storage unit is down |
2042 | Density mismatch detected |
2043 | Requested slot is empty |
2044 | Media is assigned to another application |
2045 | Storage unit is disabled since max job count is less than 1 |
2046 | Media is unmountable |
2047 | Media is write protected |
2048 | Media is in use by the ACS robotic library |
2049 | Media not found in the ACS robotic library |
2050 | ACS media has an unreadable external label |
2051 | ACS media is not in the drive's domain |
2052 | An ACS Library Storage Module (LSM) is offline |
2053 | Media is in an inaccessible drive |
2054 | Media is in a drive that is currently in a DOWN state |
2055 | ACS physical drive is not available |
2056 | The file name used for the mount request already exists |
2057 | The scan host of the drive is not active |
2058 | LTID needs to be restarted on media servers before the device can be used |
2059 | The robotic library is not available |
2060 | Media needs to be rewound or unmounted from a drive |
2061 | The host is not an active node of a cluster |
2062 | Throttled job count has been reached for the storage unit |
2063 | Server is not licensed for the Remote Client Option |
2064 | Job history indicates that no media is available |
2065 | Job history indicates that no drive is available |
2066 | Disk pool not found |
2067 | Disk volume not found |
2068 | Disk volume mount point not found |
2069 | Disk volume mount point record insert failed |
2070 | The specified mount path will not fit in the allocated space |
2071 | Unable to find any storage servers for the request |
2072 | Invalid operation on static mount point |
2073 | Disk pool is down |
2074 | Disk volume is down |
2075 | Fibre Transport resources are not available |
2076 | DSM returned an unexpected error |
2077 | DSM has already mounted the volume |
2078 | The maximum number of mounts for the disk volume have been exceeded |
2079 | DSM has detected that an invalid file system is mounted on the volume |
2080 | Disk volume has no max writers count |
2081 | Disk volume has no max readers count |
2082 | The drive needs to be marked as available |
2083 | The media affinity group is not defined in EMM |
2084 | Media affinity group record insert failed |
2085 | Disk volume is not available |
2086 | Disk volume cannot be used for more than one copy in the same job |
2087 | Media allocation would exceed maximum partially full media limit |
2088 | Cleaning media is not available |
2089 | FT client is not running |
2090 | FT client has no devices configured |
2091 | FT client devices are offline |
2092 | FT server devices for client are offline |
2093 | No FT servers for this client are running |
2094 | STU cannot run Lifecycle backups |
2095 | STU cannot run VMware backup |
2096 | NDMP operation does not support multiple inline copies |
2097 | Storage unit group does not exist in EMM configuration |
2098 | Media pool is not eligible for this job |
2099 | Required drive or drive path is not configured |
2100 | Maximum number of mounts has been exceeded for tape media |
2101 | Media server not found in EMM database |
2102 | Storage unit does not support spanning |
2103 | Media server mismatch |
2104 | Storage units are not available |
2105 | Storage unit requested for replication job is not replication capable |
2106 | Disk storage server is down |
2107 | Requested media server does not have credentials or is not configured for the storage server |
2108 | Requested NDMP machine does not have credentials or is not configured in NetBackup |
2109 | Requested Fibre Transport client machine was not found in NetBackup configuration |
2110 | Requested machine is not configured in NetBackup |
2111 | All storage units are configured with On Demand Only and are not eligible for jobs requesting ANY storage unit |
2112 | NetBackup media server version is too low for the operation |
2113 | Invalid or no disk array credentials are added for vserver |
2505 | Unable to connect to the database |
4200 | Operation failed: Unable to acquire snapshot lock |
4201 | Incorrect snapshot method configuration or snapshot method not compatible for protecting backup selection entries |
4202 | Invalid or incompatible storage unit configured |
4203 | Invalid or unsupported entry found in backup selection filelist |
4204 | Incompatible client found |
4205 | Incorrect or no credentials found |
4206 | Authentication error occurred. NetBackup Client Service is running as Local System, this is likely incorrect. |
4207 | Could not fetch snapshot metadata or state files |
4208 | Could not fetch snapshot metadata or state files |
4209 | Snapshot metadata or statefiles cannot be created |
4210 | Incorrect or no content found in snapshot metadata |
4211 | Snapshot not accessible or invalid snapshot |
4212 | Recreation of snapshot failed |
4213 | Snapshot import failed |
4214 | Snapshot mount failed |
4215 | Snapshot deletion failed |
4216 | Snapshot cleanup failed |
4218 | Snapshot deport failed |
4219 | Command operation failed: Third-party command or API execution failed |
4220 | Command operation failed: System command or API execution failed |
4221 | Found an invalid or unsupported configuration |
4222 | Operation failed: Unable to acquire policy lock to take snapshot |
4223 | Operation not completed |
4224 | STS Internal Error |
4225 | Unauthorized operation attempted by client or media on storage server |
4226 | Communication failure occurred with storage server |
4227 | STS Plug-in error occurred |
4228 | Storage server or plug-in version mismatch |
4229 | Insufficient resources or capabilities found by storage server |
4230 | Invalid storage topology or storage server configuration error |
4231 | STS Unexpected Error |
4232 | Invalid Discovery Query URI |
4233 | BIOS UUID client reference not allowed for vCloud |
4234 | VMware server login failure |
4235 | vCloud keyword used when vCloud not enabled |
4236 | vCloud policy includes multiple organizations |
4237 | Client does not meet policy requirements |
4238 | No server credentials configured for policy |
4239 | Unable to find the virtual machine |
4240 | Operation not supported |
4241 | Block-level incremental backups are not supported for this device |
4243 | Unable to connect to VirtualCenter server |
4245 | Invalid pathname for backup selection |
4246 | The requested operation was partially successful. |
4248 | Index from snapshot operation failed with an internal error |
4249 | Index from snapshot operation failed, catalog already exists |
4250 | Index from snapshot operation failed, unable to find child image or file information |
4251 | Index from snapshot operation failed. Failed to write into index database. |
4252 | Index from snapshot operation failed. Entry does not belong to any of the backup selection entries. |
4253 | Index from snapshot operation failed. SLP version mismatch for current and previous backup image. |
4254 | Invalid or no path found to create index database |
4255 | Index from snapshot using SnapDiff is disabled by the user |
4256 | Index from snapshot is not supported for the file system associated with backup selection |
4257 | Index from snapshot is not supported for the storage server |
4258 | Transient error encountered while taking Hyper-V VM snapshot. |
4259 | Failed to find VirtualCenter host name in VMware Lookup Service |
4260 | Encountered SSO login failure |
4261 | Encountered VMware Internal Server Error |
4262 | Encountered VMware vCloud Suite API failure |
4263 | Encountered VMware SOAP API failure |
4264 | Encountered unexpected error while processing TagView XML |
4265 | Encountered a VMware Virtual Machine Server that does not support Tags |
4266 | Encountered a VMware Virtual Machine Server that does not offer Tag APIs |
4267 | Failed to initialize Java Runtime Environment |
4268 | Failed to retrieve resource pool information |
4269 | Found multiple virtual machines with same identity |
4271 | Maximum virtual machine snapshots exceeded |
4272 | Maximum delta files exceeded |
4273 | Unable to lock the backup or restore host for virtual machine snapshot operations |
4274 | Failed to remove virtual machine snapshot |
4275 | Unable to consolidate Virtual Machine Disks |
4276 | Unable to retrieve Virtual Machine Disk information |
4277 | Virtual machine path contains unsupported characters |
4278 | Unable to retrieve virtual machine information |
4279 | Unable to retrieve virtual machine vCloud information |
4280 | Virtual machine contains independent and Raw Device Mapping disks only |
4281 | Virtual machine contains independent disks only |
4282 | Virtual machine contains Raw Device Mapping disks only |
4283 | Error detected while processing disk identifiers |
4290 | Failed to create virtual machine snapshot. Virtual machine is busy performing another operation. |
4292 | Unable to activate change block tracking in current state of virtual machine |
4293 | Invalid credentials or an access violation |
4294 | The virtual machine is disconnected |
5402 | OS Authentication error - Could not connect to the database. Please check the OS credentials |
5449 | The script is not approved for execution |
7600 | An unknown internal error occurred. |
7601 | Failed to register service with PBX. |
7603 | Failed to initialize PBX. |
7604 | Failed to register PBX acceptor with the reactor. |
7607 | Failed to set socket to non-blocking mode. |
7609 | Failed to perform a reactor event handler operation. |
7610 | Failed to parse the specified object. |
7611 | A connection protocol error occurred. |
7612 | An unexpected protocol event occurred. |
7613 | A lookup failed for host. |
7614 | No valid source-target bindings exist for host. |
7617 | A JSON conversion error occurred. |
7618 | Failed to find JSON key. |
7619 | The specified state machine is still active. |
7622 | Input I/O is required. |
7623 | Output I/O is required. |
7624 | A SSL socket accept failed. |
7625 | A SSL socket connect failed. |
7627 | SSL initialization failed. |
7628 | VxSS initialization failed. |
7631 | Certificate path lookup failed. |
7632 | A protocol sanity verification failed. |
7633 | The state machine was terminated before completion. |
7634 | Failed to set up a UNIX Domain Socket listener for user. |
7635 | Failed to create a local acceptor. |
7636 | Failed to import socket from remote process. |
7637 | Failed to export socket to remote process. |
7638 | Failed to create a socket pair. |
7639 | Failed to create a peer name mapping. |
7640 | The peer closed the connection. |
7641 | Failed to find a common CA Root for secure handshake. |
7642 | Failed to verify Java GUI session token. |
7643 | Connection cannot be established because the host validation cannot be performed. |
7645 | Could not get name from certificate information. |
7647 | Proxy peer does not conform to proxy protocol. |
7648 | Connection cannot be established because the host validation failed. |
7649 | Data retrieved from the cache is not in a valid format. |
7650 | Data that is retrieved from the server is not in a valid format. |
7651 | Could not process audit reason. |
7652 | Secure communication proxy is not available for use. |
7653 | The Peer Certificate is revoked |
7654 | The Certificate Revocation List is invalid |
7655 | Certificate Revocation List is signed incorrectly |
7656 | Certificate Revocation List is out of date |
7657 | Cannot identify service type of acceptor |
7658 | Connection cannot be established because the host validation cannot be performed on the target host. |
7659 | Connection cannot be established because the host validation failed on the target host. |
7660 | The peer proxy cannot find usable certificates for the certificate protocol |
8500 | Connection with the web service was not established |
8506 | The certificate has expired |
Reference:
https://www.veritas.com/support/en_US/doc/44037985-143647972-0/v132525115-143647972
No comments:
Post a Comment