GPRS specific cause values for GPRS Mobility Management (GMM)

GMM procedures are mandatory and applicable only for GPRS MSs and networks supporting those MSs. For GPRS MSs which are IMSI attached for both GPRS and non-GPRS services, some MM procedures are replaced by GMM combined procedures provided that the network operates in network operation mode I, i.e. is supporting combined GMM procedures. GMM combined procedures are not applicable for the GPRS MS operation mode C but are mandatory for the GPRS MS operation modes A and B and networks supporting network operation mode I.

Cause values for EPS session management

The main function of the ESM sublayer is to support the EPS bearer context handling in the UE and in the MME.

The ESM comprises procedures for:

-     the activation, deactivation and modification of EPS bearer contexts;

-     the request for resources (IP connectivity to a PDN or dedicated bearer resources) by the UE; and

-     the transport of user data via the control plane between the UE and the MME.

Each EPS bearer context represents an EPS bearer between the UE and a PDN. EPS bearer contexts can remain activated even if the radio and S1 bearers constituting the corresponding EPS bearers between UE and MME are temporarily released.

Message types for EPS Session Management

Message types for EPS session management based on 3GPP TS 24.301 V14.0.1 (2016-06)

Source:
3GPP TS 24.301 V14.0.1 (2016-06)
3rd Generation Partnership Project;
Technical Specification Group Core Network and Terminals;
Non-Access-Stratum (NAS) protocol for Evolved Packet System (EPS);
Stage 3
(Release 14)

Message types for EPS mobility management

Message types for EPS mobility management based on 3GPP TS 24.301 V14.0.1 (2016-06)

Source:
3GPP TS 24.301 V14.0.1 (2016-06)
3rd Generation Partnership Project;
Technical Specification Group Core Network and Terminals;
Non-Access-Stratum (NAS) protocol for Evolved Packet System (EPS);
Stage 3
(Release 14)

S1AP Protocol Cause

The purpose of the Cause IE is to indicate the reason for a particular event for the S1AP protocol.

The meaning of the different cause values is described in the following table. In general, “not supported” cause values indicate that the related capability is missing. On the other hand, “not available” cause values indicate that the related capability is present, but insufficient resources were available to perform the requested action.

S1AP Elementary Procedure

Definition:

S1AP consists of Elementary Procedures (EPs). An Elementary Procedure is a unit of interaction between eNBs and the EPC. These Elementary Procedures are defined separately and are intended to be used to build up complete sequences in a flexible manner. If the independence between some EPs is restricted, it is described under the relevant EP description. Unless otherwise stated by the restrictions, the EPs may be invoked independently of each other as standalone procedures, which can be active in parallel. The usage of several S1AP EPs together or together with EPs from other interfaces is specified in stage 2 specifications (e.g., TS 23.401 [11] and TS 36.300 [14]).

Diameter Result Code

Diameter Result-Code AVP (AVP Code 268) menunjukkan apakah request tertentu berhasil atau terjadi kesalahan/error. Semua Diameter answer messages dalam Diameter spesifikasi aplikasi IETF-defined HARUS menyertakan satu Result-Code AVP.

Berikut pengelompokan Diameter Result Code:

• 1xxx (Informational)
• 2xxx (Success)
• 3xxx (Protocol Errors)
• 4xxx (Transient Failures)
• 5xxx (Permanent Failure)

IMEI ( International Mobile Station Equipment Identity )

International Mobile Station Equipment Identity atau IMEI adalah identitas unik mobile equipment / handphone (HP) yang berupa deretan angka. Biasanya tercetak di tempat baterai HP namun bisa juga dicek dengan mengetikkan *#06# dan tekan call.